- User Since
- Sep 3 2017, 3:21 PM (193 w, 1 d)
Mar 25 2021
Since LXD is now working again as Snap issues have been resolved, would it be possible enable CONFIG_NETFILTER_XT_TARGET_CHECKSUM?
Good work! I managed to install LXD and Chromium. Thanks!
Mar 24 2021
I tried to install LXD after today's batch of updates and I get the following error:
Mar 23 2021
Feb 28 2021
Feb 10 2021
1- ran eopkg check (sddm, breeze-icons, noto-sans-ttf and linux-firmware were broken and repaired)
2- tried to print a pdf : it worked...
3- tried to print the pdf I had problem with : unable to print (I have other pdf files I can't print so it's not just one file)
Oct 26 2020
Sep 14 2020
Jun 12 2020
May 21 2020
Just wanted to make a small update: I installed wireguard-tools as a snap (https://snapcraft.io/wireguard-ammp), created my private/public keys, defined a wireguard vpn with the Plasma interface and successfully connected to my wireguard enabled router.
May 18 2020
Apr 20 2020
Should a new task be created to have the package wireguard-tools ?
Apr 3 2020
Solved after install of qt5-translations and logout-login. I guess you must now find a way to make this package dependant of something when english is not the default language...
Feb 13 2020
Feb 12 2020
With the 2 lines disabled I connect with SMB2:
Feb 11 2020
I did some interesting tests: I disabled those 2 lines in smb.conf and now it works fine:
Installed the new built of Kio-extras and rebooted: now the icons are displayed OK but just for one directory. When I browse another directory, files are shown as directories and can't be accessed. Then in another directory, only one file is shown as a file (and can be accessed fine). So I have an irregular pattern here.
Feb 10 2020
I ran a test with smbclient and it works fine: I can put a file on the server then retrieve it with the get command. However Dolphin displays the file as a directory.
Feb 9 2020
Feb 3 2020
Thanks for the package.
Jan 11 2020
I'm not able to connect to my router with wpa3 (running Openwrt compiled from master trunk yesterday). On my computer, I get 'denied association (code=31)'. There's not much info for this error code on the web. Tested with mixed and non-mixed mode. On a more recent computer running Solus Plasma, I've been able to connect with SAE so I guess my old Dell Studio XPS wireless card wont support WPA3.
Nov 25 2019
Nov 21 2019
Nov 19 2019
Oct 24 2019
For future ref. : breeze-gtk-theme (currently 5.17.0-42) package is causing this issue.
Oct 22 2019
Oct 7 2019
Aug 2 2019
May 17 2019
Upgraded (from unstable) and no change. BTW, here's my language settings:
May 15 2019
I also checked on another system and I have the same problem (with an HP printer so I don't think it's related to the driver).
May 14 2019
No broken package on my system.
May 13 2019
May 6 2019
On kernel 5.0.7 bluetooth mouse works fine after reboot and no errors logged (still must have /usr/lib/udev/rules.d/97-hid2hci.rules /etc/udev/rules.d/hid2hci.rules modified as described).
Apr 30 2019
By refresh I meant recompile against 19.04 libs if this makes sense...
Apr 29 2019
Mar 15 2019
Working great. Thanks for the quick fix.
Mar 5 2019
Try to reboot after running usysconf. Also, make sure Solus is updated (eopkg up) and rebooted.
Jan 8 2019
No offence, I was not trying to be condescending, I just wanted to make sure you took notice of their (rather long) thread as they took years to fix this ;)
I was already a member of lpadmin and I couldn't delete the print jobs. Please take the time to read the Ubuntu bug and you'll understand what's going on. Their solution is to create a cups-pk-helper user member of lpadmin group plus:
Jan 6 2019
Jan 2 2019
Confirmed. Rolling back to osinfo-db-20161026-1-1-x86_64.eopkg as a temporary workaround.
Nov 21 2018
Nov 17 2018
Nov 16 2018
Nov 13 2018
kde-gtk-config was effectively pulled after last update. Thanks!
Nov 9 2018
Not sure if it's the same problem but here's what I have tested:
Nov 4 2018
Oct 31 2018
Problem still present on another workstation. Solution proposed still valid (systemctl enable NetworkManager-wait-online.service)
Oct 19 2018
Well, it's solved with xorg 1.20!
Oct 18 2018
I did some more tests with a Solus installation on a USB disk: on my home computer, I have the problem but gnome-shushi works fine on another computer so it looks like a display driver problem.
Oct 17 2018
On my system, I have a file named 'test' with the following content:
#!/bin/bash cd ~/.google pwd drive $1 $2 $3 $4 $5 $6 $7 $8 $9
When I view this file with Sushi, all characters are blurry.
Sep 1 2018
Solved here also. Thanks for the quick fix!
Same problem here with a Dell studio XPS. Was able to rollback with 'eopkg history -t <transaction number>'.
Jul 29 2018
Jul 16 2018
My mistake : I confused the samba service and the smb service :(
I made browsing work again by creating /etc/samba/smb.conf and adding those lines:
Jul 14 2018
May 7 2018
FYI, I tested bluez 5.48-22 (and disabled my previous workaround) : log is filled with those errors :
May 6 2018
yes: no change.
May 2 2018
I would like to reopen this request as I work with many repositories that don't support ssh (only https) so I have to use username/password for those repos.
One interesting note: the ssd drive appears in Budgie file manager applet. Digging more into this, I also found the drive appears in Nautilus under "Other places" so it's kind of hidden. As this is a camera sdcard, it might just be a "feature" of Nautilus.
Apr 28 2018
Apr 24 2018
Have a look here : https://dev.solus-project.com/T6252
Apr 22 2018
Ran usysconf to recompile apparmor profiles and now it works fine:
Apr 14 2018
I think when someone installs nautilus-share, it's because he wants to share directories and expects it works out of the box (as there's no option to enable smb in nautilus-share). At least, there should be a mention in the package description.
Apr 13 2018
I wonder if it would be a good idea to enable the smb service when nautilus-share is installed?
Apr 12 2018
Mar 2 2018
Feb 21 2018
I don't have any plugin installed other than those coming from the package.
Feb 18 2018
I tried to apply the patch to the file /usr/lib64/dracut/modules.d/90crypt/parse-crypt.sh but the file is different than the one from RH. I also tried adding 'luksname="$(str_replace "$luksname" '\' '\\')' at line 66 in the file and reboot but the boot error is still displayed. I guess the fix must be applied somewhere else or differently.