Differential D2878 Diff 7063 files/config

Changeset View

Standalone View

files/config

This file was added.

				# Example hostapd build time configuration
				#
				# This file lists the configuration options that are used when building the
				# hostapd binary. All lines starting with # are ignored. Configuration option
				# lines must be commented out complete, if they are not to be included, i.e.,
				# just setting VARIABLE=n is not disabling that variable.
				#
				# This file is included in Makefile, so variables like CFLAGS and LIBS can also
				# be modified from here. In most cass, these lines should use += in order not
				# to override previous values of the variables.

				# Driver interface for Host AP driver
				CONFIG_DRIVER_HOSTAP=y

				# Driver interface for wired authenticator
				CONFIG_DRIVER_WIRED=y

				# Driver interface for Prism54 driver
				CONFIG_DRIVER_PRISM54=y

				# IEEE 802.11F/IAPP
				CONFIG_IAPP=y

				# WPA2/IEEE 802.11i RSN pre-authentication
				CONFIG_RSN_PREAUTH=y

				# PeerKey handshake for Station to Station Link (IEEE 802.11e DLS)
				CONFIG_PEERKEY=y

				# IEEE 802.11w (management frame protection)
				# This version is an experimental implementation based on IEEE 802.11w/D1.0
				# draft and is subject to change since the standard has not yet been finalized.
				# Driver support is also needed for IEEE 802.11w.
				CONFIG_IEEE80211W=y

				# Integrated EAP server
				CONFIG_EAP=y

				# EAP-MD5 for the integrated EAP server
				CONFIG_EAP_MD5=y

				# EAP-TLS for the integrated EAP server
				CONFIG_EAP_TLS=y

				# EAP-MSCHAPv2 for the integrated EAP server
				CONFIG_EAP_MSCHAPV2=y

				# EAP-PEAP for the integrated EAP server
				CONFIG_EAP_PEAP=y

				# EAP-GTC for the integrated EAP server
				CONFIG_EAP_GTC=y

				# EAP-TTLS for the integrated EAP server
				CONFIG_EAP_TTLS=y

				# EAP-SIM for the integrated EAP server
				CONFIG_EAP_SIM=y

				# EAP-AKA for the integrated EAP server
				CONFIG_EAP_AKA=y

				# EAP-PAX for the integrated EAP server
				CONFIG_EAP_PAX=y

				# EAP-PSK for the integrated EAP server (this is _not_ needed for WPA-PSK)
				CONFIG_EAP_PSK=y

				# EAP-SAKE for the integrated EAP server
				CONFIG_EAP_SAKE=y

				# EAP-GPSK for the integrated EAP server
				CONFIG_EAP_GPSK=y
				# Include support for optional SHA256 cipher suite in EAP-GPSK
				CONFIG_EAP_GPSK_SHA256=y

				# PKCS#12 (PFX) support (used to read private key and certificate file from
				# a file that usually has extension .p12 or .pfx)
				CONFIG_PKCS12=y

				# RADIUS authentication server. This provides access to the integrated EAP
				# server from external hosts using RADIUS.
				CONFIG_RADIUS_SERVER=y

				# Build IPv6 support for RADIUS operations
				CONFIG_IPV6=y

				CONFIG_DRIVER_NL80211=y

				CONFIG_IEEE80211N=y

				CONFIG_LIBNL32=y

				CONFIG_ACS=y

				CONFIG_IEEE80211AC=y

				CONFIG_OPENVSWITCH=y

				CONFIG_IEEE80211R=y

				CONFIG_WPS=y

				CONFIG_WPS2=y

				CONFIG_WPS_UPNP=y
				No newline at end of file